PVC Type 1
PVC Type 1 is a commonly used thermoplastic offering excellent corrosion, chemical and impact resistance. PVC is an economical and easily machinable material enabling a wide range of applications. PVC Type 1 is commonly used for corrosive-resistant valve and fittings but can also be used for pool components, lab equipment among other corrosive environments.
PVC Type 1 has numerous benefits including a higher heat distortion temperature, high strength to weight ratio, industry compliance (ASTM D-1784, ASTM E-84, and UL 94 V-0) and does not contain any plasticizers or fillers.
PVC Type 1 is a commonly used thermoplastic offering excellent corrosion, chemical and impact resistance. PVC is an economical and easily machinable material enabling a wide range of applications. PVC Type 1 is commonly used for corrosive-resistant valve and fittings but can also be used for pool components, lab equipment among other corrosive environments.
PVC Type 1 has numerous benefits including a higher heat distortion temperature, high strength to weight ratio, industry compliance (ASTM D-1784, ASTM E-84, and UL 94 V-0) and does not contain any plasticizers or fillers.
PVC Type 1 is a commonly used thermoplastic offering excellent corrosion, chemical and impact resistance. PVC is an economical and easily machinable material enabling a wide range of applications. PVC Type 1 is commonly used for corrosive-resistant valve and fittings but can also be used for pool components, lab equipment among other corrosive environments.
PVC Type 1 has numerous benefits including a higher heat distortion temperature, high strength to weight ratio, industry compliance (ASTM D-1784, ASTM E-84, and UL 94 V-0) and does not contain any plasticizers or fillers.
Common Applications for PVC Type 1
PVC Type 1s exceptional corrosion resistance is ideally suited for applications where maximum chemical defense is necessary, including:
Chemical Processing Equipment
Air Handling
Acid Baths
Fabricated Piping Components
Laboratory Workstations
Pool Components
Plating Tanks
Electrical Cabinets
Fabricated Parts
PVC Type 1 Technical Data
| Property | Test Method | Unit | Value |
|---|---|---|---|
| Physical | |||
| Density | ASTM D-792 | g/cm3
| 1.42 |
|
| Water Absorption | ASTM D-570 | % | 0.06 |
| Rockwell Hardness | ASTM D-785 | R Scale | 115 |
| Shore Durometer | ASTM D-224 | D | 89 |
| Cell Class | ASTM D-1784 | 12454-B | |
| Mechanical | |||
| Tensile Modulus | ASTM D-638 | psi | 411,000 |
| Yield Strength | ASTM D-790 | psi | 7,500 |
| Flexural Modulus | ASTM D-790 | psi | 481,000 |
| Yield Strength | ASTM D-790 | psi | 12,800 |
| Izod Impact Strength | ASTM D-256 | ft-lb/in | 1.0 |
| Thermal | |||
| Vicat Softening Point | ASTM D-1525 | °C/°F | 83/181 |
| Heat Deflection Temp (66psi) | ASTM D-648 | °C/°F | 82/179 |
| Heat Deflection Temp (264psi) | ASTM D-648 | °C/°F | 80/176 |
| Coefficient of Linear Expansion | ASTM D-696 | in/in/°C | 5.8 x 10-5 |
| Coefficient of Linear Expansion | ASTM D-696 | in/in/°F | 3.2 x 10-5 |
| Flammability Ratings | |||
| Flame Spread Index | ASTM E-84 | 20 | |
| Flammability | UL 94V | 0 | |
| Flammability | ASTM D-635 | Self Extinguishing | |
| Chemical | |||
| Chemical Resistance | ASTM D-1784 | Class B | |
| Electrical | |||
| Electrical Volume Resistivity | ASTM D-257 | Ohm/cm | 5.4 x 1015 |
| Dielectric Constant | ASTM D-150 | 60 Hz | 3.9 |
| Dissipation Factor | ASTM D-150 | 60 Hz | 0.0096 |
| Loss Index | ASTM D-150 | 60 Hz | 0.030 |
| Dielectric Strength | ASTM D-149 | Volts / mil | 544 |
